QP95-RE002-01
*********************************************************************************************************************

J6 Release Notes
Current Version: V3.0.0.0.STD

[Notes]
1. J6 V3.0.0.0.STD must work with V-Can 3.5.1 or later version.
2. It is recommended you update the J6 to V3.0.0.0.STD in Boot mode.

[New Features]
1. Supports layer border settings.
2. Supports the image fills the whole MVR window.
3. Supports the converting of input source color range from RGB limited to RGB full.
4. Supports AUX scaling and AUX follow screen FTB. 

5. Supports displaying PVW and PGM sources on MVR windows.
6. Supports deinterlacing MQ algorithm on SDI input connectors to improve display effect.
7. Supports keeping screen lock status after the device is powered off. After the screen is locked, it will keep locked after a power off and power on.
8. Supports auto sync function of the input source. When you unplug the sync source or change the resolution of the sync source, the device will synchronize the input source automatically.
9. Supports preset renaming in V-Can 3.5.1 or later version.
10. Supports input source renaming in V-Can 3.5.1 or later version.
11. Supports turning on or off FTB and FTB duration settings.
12. Supports RGB independent adjustment for the input sources, layers and output connectors.
13. Supports manual closing of test pattern (set to Normal).
14. Supports highlighting the abnormal items in red in device diagnostics.
15. Supports keeping HDCP status when the device is powered off. Hold down the knob for 10 seconds on the home screen to access this menu item to set whether to keep the HDCP status.

[Bug Fixes]
1. Fixed the problem that the screen is not pure black when the screen brightness is set to 0.
2. Fixed the problem that different layers have different image qualities.
3. Fixed the problem that color cast occurs when a YUV input source is accessed to the HDMI 1.4 or DP 1.1 connector.
4. Fixed the problem that there is a possibility of flickering when no input source is accessed to the SDI connector.
5. Fixed the synchronization problem for the interlaced signal.